30 oz Skinny Straight — MakerFlo Sublimation Template — 10.3″ × 9.6″ (Free PNG & SVG)
The official MakerFlo template size for the 30 oz skinny straight — makerflo is 10.3″ × 9.6″ — this generator gives you that exact size as a true 300 DPI PNG or real-size SVG, with safe zones drawn in.
Open this template in the generator →
Template dimensions
| Template size | 10.3″ × 9.6″ |
| At 300 DPI | 3090 × 2880 px |
| Size source | MakerFlo official published size |
| Wrap shape | straight rectangle (overlap/handle gap included) |
Good to know: Noticeably larger than the HOGG-style 30 oz — never reuse a wrap between the two.
How to use this template
- Download the template (PNG for Canva/Procreate/Photoshop, SVG for Cricut Design Space or Silhouette Studio).
- Place your design inside the dashed safe-zone line — anything outside it risks being cut off at the seam or rims.
- Print at 100% scale (no "fit to page") on sublimation paper, mirrored.
- Wrap the print around the tumbler, secure with heat tape, and press in a tumbler press or convection oven per your blank supplier’s time and temperature.
FAQ
What size is a 30 oz skinny straight — makerflo sublimation template?
10.3″ × 9.6″ (3090 × 2880 px at 300 DPI). This is the size MakerFlo publishes for this blank, and it already includes the overlap or clearance the blank needs.
Is the 30 oz skinny straight — makerflo wrap a simple rectangle?
Yes — this template is a clean 10.3″ × 9.6″ rectangle. Just confirm your specific blank isn't slightly tapered: measure the top and bottom with calipers, and if they differ, use the custom-size generator to get the correct curved wrap instead.
What DPI should the template be for sublimation?
300 DPI is the standard for crisp sublimation prints. The PNG from this generator carries true 300 DPI metadata, so Procreate, Photoshop, Canva and Silhouette Studio open it at the exact physical wrap size — 10.3″ × 9.6″ — with no rescaling.